整經機

研發和生產系列經編機、高檔經編全成形服飾的綜合性國家高新技術企業。擁有五洋紡機、五洋賽德、艾詩麗3D經編服飾、數字工廠、五洋越南等多個實體。

關鍵詞：

整經機

所屬分類：

配套設備

詢價

優選推薦

產品描述

用途 APPLICATION

電腦拷貝高速整經機為高性能整經設備。本機的微電腦控制系統在整經過程中連續監測盤頭直徑并實時進行張力調控。保證成組盤頭的直徑（外周長）及米長一致。適用于錦、滌長絲，低彈絲、粘膠絲、棉紗、綸紗等短纖紗。
The warping machine is our new developed product . The diameter of the beam can be monitored and the tension can be controlled during warping by micro computer control system , which can make sure the same diameter of the beam group and the length . It is suitable for warping cotton yarn , viscose , blending yarn , polyamide and polyester filament , low elastic polyester fiber , viscose , and short - fiber yarn .

特點 FEATURES

1、機型新穎、操作簡便、智能識別、各種數據自動保存；2、速度跟蹤自動控制、自動控制檢測機構、失電保護系統；3、根據母盤頭的樣本，拷貝出成組參數相同的盤頭；
4、電腦實時檢測盤頭的直徑、米長及圈數，控制紗線張力平穩，保證成組盤頭的直徑（外周長）及米長一致；
5、盤頭裝卸由氣動驅動，并作直線升降，運作平穩，定位精確，主軸制動采用氣動制動器；
6、具有配盤頭功能，根據盤頭周長和圈長可以配出同樣的盤頭。
1.Novel type , simple operation , intelligent identification , auto - reservation of data ;
2.Electronic gear , auto - controlled speed track and auto - controlled inspecting machine and power cutting protection system ;
3.According to the mother beam , the sub - beam with same perimeter are to be made ;
4.The diameter of the beam can be monitored and the tension is stable , which make sure the same diameter of the beams group and the length ;
5.The load and unload of the beam is controlled
pneumatically , up and down in line , the motion is stable and postion is precise , The break of main shaft adopts pneumatic brakes ;
6.The machine can set the beams , i . e . according to the mother beam , the sub - beams with same perimeter and rotations can be made .

主要技術參數 THE MAIN SPECIFICATION

1、線速度：80-980米／分鐘2、盤頭規格：21"X30"（英寸）,21"X40"（英寸）21"X42"（英寸）3、頭升降、夾緊及剎車：氣動控制4、主電機功率：11KW交流變頻控制5、張力羅拉：電機、變頻控制6、控制方式：電腦實時控制和顯示7、拷貝精度：同組經軸周長誤差小于5毫米8、最大計數范圍：99999米（圈）
1.Warp line speed :80-980m/ min 2.Warp beam size : A :21" x Ф30"( inch ) B :21" x Ф40"( inch ) C :21" x Ф42"( inch )3.The up and down of the beam , clamp and brake : pneumatically control 4.Motor power :11KW AC FC control 5.Tension roller : Servo motor , AC FC control , adjust the angle of the tension roller in electromotion .6.Control way : Micro - computer real - time monitoring and showing 7.Copy precision : the perimeter error of the same group beam is less than 5mm, the tension wave is equal 8.Max counting range :99999 meters ( circles )

優選推薦